2006 Ford Fusion Specifications

See also:

Technical Specifications

    I-4   V-6
   BODY
Construction Unitized welded steel body   Unitized welded steel body
   POWERTRAIN AND CHASSIS
Engine    
Type 2.3-liter DOHC 16-valve inline 4-cylinder   3.0-liter DOHC 24-valve V-6
Manufacturing location Chihuahua Engine Plant, Mexico   Cleveland Engine Plant #2, Ohio
Configuration Aluminum block and head   Aluminum block and heads
Intake manifold Composite, with dual runners   Composite
Exhaust manifold Cast iron / fabricated steel (PZEV)   Cast iron
Crankshaft Cast iron   Steel
Redline 6,800 rpm   6,550 rpm
Idle speed in neutral 750 rpm   800 rpm
Throttle body 55 mm, electronic, water heated   60 mm, electronic, water heated
Valvetrain DOHC, 4 valves per cylinder,
intake variable camshaft timing
  DOHC, 4 valves per cylinder,
  intake variable camshaft timing
Valve diameter Intake: 35 mm
Exhaust: 30 mm
  Intake: 33.5 mm
  Exhaust: 28 mm
Pistons Aluminum with low-friction coated skirts,
hard-anodized top-ring groove, ring parkerizing
  Hypereutectic cast aluminum with
  low-friction coated skirts, low-tension rings
Connecting rods Cracked powdered metal   Cracked powdered metal
Ignition Coil on plug   Coil on plug
Bore x stroke 3.4 x 3.7 in. / 87.5 x 94.0 mm   3.5 x 3.1 in. / 89 x 79.5 mm
Displacement 139 cu. in. / 2,261 cc   182 cu. in. / 2,967 cc
Compression ratio 9.7:1   10.0:1
Maximum mean piston speed 21.3 m/sec   17.36 m/sec
Engine control system Silver Oak PCM   Silver Oak PCM
Horsepower 160 @ 6,500 rpm   210 @ 6,250 rpm
Horsepower per liter 70   70
Torque 150 lb.-ft. @ 4,000 rpm   200 lb.-ft. @ 4,750 rpm
Recommended fuel 87 octane   87 octane
Fuel capacity 18 gallons   18 gallons
Est. tank range 500 miles   500 miles
Fuel injection Sequential electronic fuel injection   Sequential multi-port fuel injection
Emission control Closed loop with catalyst   Closed loop with catalyst
Emissions (tailpipe/evaporation)
 
Tier 2, Bin 5 / LEV II
Tier 2, Bin 5 / LEV II
 
  Tier 2, Bin 5 / ULEV II
 
California emissions (tailpipe/evaporation)
 

PZEV (SULEV II / ZEV)
ULEV II / LEV II
 

  ULEV II / LEV II
 
Oil capacity 4.8 quarts with filter   6 quarts with filter
Recommended oil GF-4, 5W-20   GF-4, 5W-20
Coolant capacity 9.7 quarts   9.7 quarts
DRIVETRAIN    
Layout Front-wheel drive   Front-wheel drive
TRANSMISSION    
Standard five-speed manual   Six-speed automatic
Gear ratios    
  1st 3.31:1   4.15:1
  2nd 1.84:1   2.37:1
  3rd 1.23:1   1.56:1
  4th 0.97:1   1.16:1
  5th 0.76:1   0.86:1
  6th     0.69:1
  Final Drive 4.39:1   3.46:1
Optional  
  1st 3.50:1  
  2nd 1.86:1  
  3rd 1.24:1  
  4th 0.90:1  
  5th 0.69:1  
  Final Drive 3.86:1  
SUSPENSION    
Front Independent short and long arm (SLA) with
rearward-facing lower control arms
24-mm stabilizer bar
  Independent short and long arm (SLA) with
  rearward-facing lower control arms
  24-mm stabilizer bar
Rear Multi-link fully independent with
coil-over shocks and lower control arms
16-mm stabilizer bar
  Multi-link fully independent with
  coil-over shocks and lower control arms
  16-mm stabilizer bar
STEERING    
Type Low-friction rack and pinion with power assist   Low-friction rack and pinion with power assist
Steering column Tilt and telescope   Tilt and telescope
Ratio 0.667361111   0.667361111
Turns lock-to-lock 2.7 turns (2.5 turns w/ optional 17-in. wheels)   2.7 turns (2.5 turns w/ optional 17-in. wheels)
Turning circle curb-to-curb 38.7 ft. (40 ft. w/ optional 17-in. wheels)   38.7 ft. (40 ft. w/ optional 17-in. wheels)
BRAKES    
Type Four-wheel power disc brakes with
optional 4-sensor, 3-channel
anti-lock braking system (ABS) and
electronic brake force distribution (EBD)
  Four-wheel power disc brakes with
  optional 4-sensor, 3-channel
   anti-lock braking system (ABS) and
  electronic brake force distribution (EBD)
Front 299 x 25 mm ventilated   299 x 25 mm ventilated
Swept area 39.8 cm2   39.8 cm2
Rear 279 x 10 mm solid   279 x 10 mm solid
Swept area 21.95 cm2   21.95 cm2
TIRES AND WHEELS
(TYPE, SIZE)
   
Standard P205/60TR16
16 x 6.5-inch steel wheels
  P205/60TR16
  16 x 6.5-inch steel wheels
Optional P205/60TR16
16 x 6.5-inch aluminum wheels
  P225/50VR17
  17 x 7-inch aluminum wheels
Recommended tire pressure (ft/rear) 34/34 psi (33/33 psi w/ optional 17-in. wheels)   34/34 psi (33/33 psi w/ optional 17-in. wheels)
   DIMENSIONS (inches unless otherwise noted)
EXTERIOR    
Wheelbase 107.4   107.4
Overall length 190.2   190.2
Overall width 72.2   72.2
Overall height 55.8   55.8
Track width, front/rear 61.6 / 61.3   61.6 / 61.3
INTERIOR    
Seating capacity 5   5
Front headroom 38.7   38.7
Front legroom 42.3   42.3
Front shoulder room 57.4   57.4
Front hip room 54.0   54.0
Rear headroom 37.8   37.8
Rear legroom 37.0   37.0